Kenmore Refrigerator Repair in Minneapolis

45 Years of Kenmore Refrigerator Repair

Kenmore Refrigerator Repair: Fast, Accurate Diagnosis

I'm Larry, and I've repaired Kenmore refrigerators for 45 years, side-by-sides and Coldspot models included. The visit is $89, every repair carries a one-year warranty, and you reach me personally when you call or text. Kenmore refrigerators aren't built in a Kenmore factory, because there isn't one: the name is Sears' own, licensed out to whichever manufacturer built that particular model and year, and for a refrigerator that difference shows up most in one place, the compressor.

In 45 years of repair work I've learned to identify what's actually running inside a Kenmore fridge before I ever order a part, because the wrong guess means a second trip and a part that doesn't fit.

Kenmore Refrigerator Not Cooling

Most of the not-cooling calls I get, on side-by-sides, Coldspot models and every other Kenmore refrigerator, are fixable. First, I check the condenser coils at the bottom of the unit. Years of dust buildup make the compressor work harder than it should, and eventually it can't keep up.

If the coils are clean and the fan is running but the fridge still isn't cold, I'm usually looking at the compressor itself. Compressors on Kenmore refrigerators don't all fail the same way, and knowing which kind I'm working on before I open the panel saves real time.

Kenmore Refrigerator Leaking Water

Water pooling in or under a Kenmore fridge almost always traces back to one of two things: a clogged defrost drain or a cracked water inlet valve. A clogged drain backs water up into the freezer first, and it eventually finds its way out onto your floor. A failed inlet valve leaks from the water line connection at the back of the unit instead.

A hair dryer on the drain buys you a day, maybe two, before it refreezes shut again. Properly clearing and sealing it is the lasting fix, and I handle it on your first visit.

Kenmore Ice Maker Problems

Before you call about a dead ice maker, check one thing yourself: make sure the shut-off arm hasn't been bumped into the off position. I've shown up to more than one Kenmore fridge where that was the entire issue.

If the arm is where it should be, the usual suspects are a jammed ejector arm, a failed water filter restricting flow, or a frozen water line. The internal heating element that releases the cubes from the tray can also fail on its own. I can usually finish all of these repairs while I'm already there.

Kenmore Refrigerator Repair Questions

Why is my Kenmore refrigerator not cooling? Usually a dirty condenser coil, a failed start relay, or a worn compressor. Compressors fail in different ways from model to model, so identifying the exact model matters before ordering any parts.

How much does it cost to fix a Kenmore refrigerator? The service call is $89 and covers a full diagnosis. You'll know the repair price before I start any work.

Why is my Kenmore refrigerator leaking water? Almost always a clogged defrost drain or a cracked water inlet valve. Both are straightforward, same-visit repairs once I know which one it is.

Is it worth repairing an older Kenmore refrigerator? Usually, yes. These are well-built machines, and most failures come down to one part, not the whole system. I'll tell you plainly if yours is the exception.

Fast Kenmore Refrigerator Repair

A refrigerator doesn't give much warning before it fails outright, so a buzzing, clicking, or already-warm unit is worth acting on now rather than waiting to see if it resolves itself.

My service call is $89 plus the repair, and I lean toward same-day appointments whenever I can make them work. Every repair is backed by a full one-year guarantee on parts and labor, and my goal is to get your Kenmore running for the rest of its natural life, not just patched until next season.

Call Today: (612) 913-6986

Minneapolis Appliance Repair Service | Serving Minneapolis, MN & Suburbs | Call or Text Me (612) 913-6986

© 2026. All rights reserved.